POWER RACK HD3 - ATLANTE
Titano is the combination of two Power Rack HD3 connected together by a single square long beam, 4 upright extensions up to 450cm from the ground with 2 cliff and 2 connection high beams to use 2 pairs of rings and 2 climbing ropes at the same moment.
The square beams and castle structure offer a further stability to both racks and the pull up bar is ideal for 2 pull ups spots. There is the possibility to hang 2 pairs of rings and 2 climbing ropes so that the entire structure is usable by 8 people together. The beams can be used to hang rings and trx or even used like a storage for elastic bands, jump ropes, weightlifting belts and so on.
Attention: bumper plates, bars, half safety, benches and rings are not included in the offer and can be purchased separately on the website.
SPECIFICS
• 80x80mm Steel Uprights – 360 cm height
• Matt Black Powder Coat Finish
• Uprights Hole Spacing: 5 cm hole spacing to allow a better setting of the hook set
• 16mm bolts and fasteners
• 4 J-Cups with polyethylene inserts and backs
• 2 standard pull up bar 33 mm
• 1 pull bar 33mm
• 2 safety straps
• 16 weight storage
• 2 cliffs
• 4 uprights up to 450 cm
• Weight capacity: 500kg each rack
• Weight of the combination: 600 kg
• Foot print: 414cm x 182cm
• minimum space or wall required: 550 cm width
• (your name plate beam and more accessories can be purchased separately)
• the rack need to be bolted to the floor
• the rack can be used outdoor only if protected by a roof, It is not suitable for direct use to the weather.
• *Image above includes optional accessories that are sold separately