POWER RACK HD3 - ATLANTE
Atlante is the combination of two Power Rack HD3 connected together by two square long beams and a pull up bars.
The square beams offer a further stability to both racks and the pull up bars are ideal for 4 pull ups. There's a total of 6 pull up bars considering 2 pull up bars on both racks. The beams can be used to hang rings and trx or even used like a storage for elastic bands, jump ropes, weightlifting belts and so on.
Morover there are 16 lateral weight storage for your bumper plates.
Attention: bumper plates, bars, half safety, benches and rings are not included in the offer and can be purchased separately on the website.
SPECIFICS
• 80x80mm Steel Uprights – 244 cm height
• Matt Black Powder Coat Finish
• Uprights Hole Spacing: 5 cm hole spacing to allow a better setting of the hook set
• 16mm bolts and fasteners
• 4 J-Cups with polyethylene inserts and backs
• 2 standard pull up bar 33 mm
• 1 long pull up bar 33 mm
• 16 storage pin to hold your weights on the rear uprights
• Weight capacity: 500kg each rack
• Weight of the combination: 386 kg
• Foot print: 414cm x 182cm
• minimum space or wall required: 550 cm width
• (your name plate beam and more accessories can be purchased separately)
• the rack need to be bolted to the floor
• the rack can be used outdoor only if protected by a roof, It is not suitable for direct use to the weather.
• *Image above includes optional accessories that are sold separately